1 1

REPTITRIP

2 in 1 Reptile Dimming Thermostat with 2 Socket for Timer & Heating Control

2 in 1 Reptile Dimming Thermostat with 2 Socket for Timer & Heating Control

$42.99 USD
$0.00 USD $42.99 USD
Sale Sold out
Shipping calculated at checkout.

Product description

  • IMPORTANT: These two sockets are two-prong outlets. They are not compatible with three-prong plugs, such as those used by the T5 UVB light fixture.
  • NOTE: Place the temperature sensor in the reptile's basking area. If the current temperature (PV) consistently fails to reach the set temperature (SV), replace the heating bulb with a higher-wattage one (the insufficient temperature at the probe indicates the lamp’s heat output to that area is too low, so a higher-wattage bulb is required). The maximum supported power for this product is 260W.
  • This 2-in-1 Reptile Dimming Thermostat features two sockets, allowing you to connect and control two heating devices simultaneously. One socket offers timer control, with settings from 1 to 24 hours to turn the device on or off automatically. The other provides PID temperature dimming control, which maintains a stable temperature based on your set point.
  • Timer Socket: Supports heating devices up to 260W. You can set an on/off timer for 1 to 24 hours. For example, set an 8-hour timer for daily cycles of 8 hours on and 16 hours off. Compatible with various reptile heating devices, including heating mats, daytime heat lamps, infrared heat lamps, ceramic heat emitters, UVA/UVB sun lamps, UVB lights, and LED lights.
  • PID Temp Socket: Supports heating devices up to 260W. Place the temperature sensor inside the enclosure and set your desired target temperature. The device will then automatically adjust its heat to maintain a stable temperature. Compatible with reptile heating devices such as heating mats, daytime heat lamps, infrared heat lamps, and ceramic heat emitters.
  • How to use it? For example, if you keep a bearded dragon and use a daytime heat lamp along with a Ceramic Heat Emitter for night heating, you can connect the heat lamp to the timer socket and the ceramic heater to the PID temperature socket. Set the timer to 12 hours to simulate a natural day-night cycle. If additional warmth is needed, the ceramic heater will automatically activate. At night, even when the heat lamp turns off, the ceramic heater continues to operate until the desired temperature is reached.
  • PID Precision Control Maintains reptile habitats within ±1°F accuracy using advanced PID algorithms. Automatically adjusts heat lamp/pad output to prevent dangerous spikes, verified by reptile owners with infrared thermometers.
  • Energy-Saving Efficiency Smoothly dims heat sources (up to 260W) like sunrise/sunset, reducing bulb wear by 50% vs. on/off thermostats. Ideal for light-sensitive pets like crested geckos. Reduces power waste with gradual adjustments. Owners report 30% lower bills vs. basic thermostats.
  • Easy Setup, Clear Display Large screen shows real-time temp/power. Mount probe via suction cup—ready in 5 mins. Users love the no-fuss controls!
View full details