Tigeen
Oil Absorbent Mat Roll, 5.3 Oz per Sq Yd, 15 in X 50 Ft, Gray, 2 Roll Pack
Oil Absorbent Mat Roll, 5.3 Oz per Sq Yd, 15 in X 50 Ft, Gray, 2 Roll Pack
Couldn't load pickup availability
Features:
Reliable leak and spill protection:
Keep your spaces clean and safe with these highly absorbent pads that quickly contain leaks from spreading. Their efficient design allows for straightforward cleanup of various fluid types.
Practical and economical maintenance solution:
Get effective liquid absorption with these durable, easy to tear mats. Their large capacity and strong construction mean fewer change outs, offering a practical solution for ongoing maintenance needs.
Specifications:
Material: filter cotton
Color: gray
Size:
Width and total length about 15 inches x 50 ft/ 40 cm x 15 M
Thickness about 2 mm
Package includes:
2 x Absorbent mats
Notes:
Manual measurement, please allow slight errors on size.
The color may exist a slight difference due to different screen displays
- Measured Basis Weight: built with 180 GSM absorbent material, equal to approximately 5.3 oz per square yard, for a defined material weight across the covered area; This specification describes basis weight rather than total roll weight, thickness, or absorption capacity, giving you a consistent way to evaluate construction; The sheet supports routine pickup of oil, coolant, grease, water, and common maintenance fluids around vehicles, benches, tools, and service equipment
- Custom Length Control: tear lines spaced every 10 inches let you separate short pads for isolated drips or prepare longer sections for work areas with wider exposure; The roll can also be cut when a task calls for a different length, helping match material use to the spill instead of covering the floor with an oversized piece; Keep unused sections rolled for later oil changes, equipment servicing, workbench protection, or recurring leaks in a garage or workshop
- Fluid Pickup Capacity: each complete roll is rated to hold approximately 12 to 18 liters, or about 3.17 to 4.8 gallons, depending on the liquid and use conditions; Smaller sections provide a proportional amount of pickup for oil, coolant, grease, water, and other common maintenance fluids; Use a short pad beneath a drip point, a longer strip beside a vehicle, or multiple layers when the volume, flow rate, or surface condition calls for added coverage
- Two Area Supply: the paired roll format supports separate cleanup stations without moving one bulky roll between locations; Store one near a vehicle bay and the second by a workbench, basement utility area, mower, or service equipment so absorbent material is available near recurring drip points; The two roll arrangement also allows one roll to remain clean and ready while the other is open, partly used, or assigned to a different maintenance task
- Wet Strength and Handling: the 2 mm sheet is designed to stay together after absorbing liquid, making used sections easier to lift and discard without the rapid breakup associated with ordinary paper towels; Place the material flat beneath a known leak or over a fresh spill, allow time for pickup, and replace it before saturation causes liquid to reach the surrounding floor; Suitable for routine garage, workshop, factory bay, basement, and home maintenance cleanup
Share
